Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #10-32, 1/4" Length (Pack of 100)

!#8#Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #10-32, 1/4" Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 11, 2012 12:36:05
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Discounted Starry * Sky: In Spring - Psp Edition [japan Import]... Good Natural Sea Yellow Fin Tuna Without Salt -- 6 Oz Each... Japonesque Touch Up Tube Makeup Brush Set - Blue... Cheap