Sunday, April 1, 2012

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 30mm Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 30mm Length (Pack of 100)



Brand : Small Parts
Post Date : Apr 01, 2012 06:15:48

  • Machine Screws are often used with nuts or driven into tapped holes
  • Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
  • Pan head allows for higher tightening torques
  • Phillips drive is designed to cam out under too much torque
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.



Disclaimer : This site/page does not included in any the parts with amazon.com but it is participant in the amazon services LLC associates program by advertising and linking to amazon.com , Certain content that appears on this site comes from amazon services LLC. This content is provided 'as is' and is subject to change or removal at any time.

How Do I Get Gilbey's Vodka 80@ 200ml...

Monday, March 26, 2012

Brass Machine Screw, Flat Head, Slotted Drive, #6-32, 1/4" Length (Pack of 100)

!#8# Brass Machine Screw, Flat Head, Slotted Drive, #6-32, 1/4" Length (Pack of 100)


Rate : | Price : | Post Date : Mar 26, 2012 21:30:30
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Comparison Bosch 09718 Premium Spark Plug Wire Set... Shopping United States Flag Usa American Game Vinyl Decal Cover Skin Protector Fo... Lg Heat / Cool Window Air Conditioner With Remote - 23500 Btu... Discount

Thursday, March 22, 2012

StarTech Replacement Screws - 15 Pack 15SCREW6_32

!#8#StarTech Replacement Screws - 15 Pack 15SCREW6_32

Brand : StarTech
Rate :
Price : $1.99
Post Date : Mar 22, 2012 21:45:06
Usually ships in 24 hours



This pack of 15 #6-32 x 1/4" long screws are handy for building, repairing, and maintaining computer systems.

Wholesale Brass Machine Screw, Flat Head, Slotted Drive, 5/16"-18, 1-1/2" Length ... Save 3.55 Carat Genuine Ruby Sterling Silver Ring...

Sunday, March 18, 2012

Polypropylene Machine Screw, Binding Head, Slotted Drive, #2-56, 1" Length (Pack of 100)

!#8#Polypropylene Machine Screw, Binding Head, Slotted Drive, #2-56, 1" Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 19, 2012 01:15:31
Usually ships in 24 hours



Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polypropylene is a thermoplastic which is autoclavable (meaning that it can be sterilized using steam), and is non-hydroscopic (it won't absorb water even after extended periods of contact). Polypropylene has excellent chemical resistance to dilute acids, concentrated acids (except oxidizing acids), alkalis, alcohols, detergents, and water. Polypropylene resists aromatic hydrocarbons, chlorinated hydrocarbons, greases, and oils at room temperature. Maximum operating temperature is 212 degrees Fahrenheit. Polypropylene has a low co-efficient of friction and a high dielectric strength (meaning it operates well as an insulator). Polypropylene has approximately half the tensile strength and impact strength of Nylon 6/6. The tensile strength of Polypropylene is 5000 psi (pounds per square inch). Impact Strength, as measured by the Izod impact test method (which measures force required to break material) is 0.5 pounds per foot.

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

New Avery Divide'n Style Divider Kit 6ct: Make Your Dividers Your Own!... Shop Filbur Fc-0359m Filter Cartridges...

Wednesday, March 14, 2012

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M3-0.5, 6mm Length (Pack of 100)

!#8# Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M3-0.5, 6mm Length (Pack of 100)


Rate : | Price : $4.54 | Post Date : Mar 14, 2012 16:32:03
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Best Price St. Remy Brandy Vsop Authentic 200ml... Ngk (8351) Lb10eh Spark Plug Cap... Online

Sunday, March 11, 2012

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #10-32, 1/4" Length (Pack of 100)

!#8#Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #10-32, 1/4" Length (Pack of 100)

Brand : Small Parts
Rate :
Price :
Post Date : Mar 11, 2012 12:36:05
Usually ships in 24 hours



Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Discounted Starry * Sky: In Spring - Psp Edition [japan Import]... Good Natural Sea Yellow Fin Tuna Without Salt -- 6 Oz Each... Japonesque Touch Up Tube Makeup Brush Set - Blue... Cheap

Thursday, March 8, 2012

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100)

!#8# Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100)


Rate : | Price : | Post Date : Mar 08, 2012 13:15:17
Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Cheaper Denso (3002) J16br-u11 Traditional Spark Plug, Pack Of 1... Price Impeller Housing System 12... Wii Dual Charger Station... Order Now

Monday, March 5, 2012

M6 S/S Set Screws M6 x 20mm

!#8#M6 S/S Set Screws M6 x 20mm

Brand :
Rate :
Price :
Post Date : Mar 05, 2012 21:45:05
N/A



Metric thread M6 Socket set screws use an allen drive. Also called hex tips or hex screws, like a machine screw without a head. Threaded the entire length with a cup point end. Made of stainless steel.

Good Bosch D3324 Distance Plus High Performance Oil Filter, Pack Of 1... 12' X 18' X 28" High Jump Pit... Right Now Lowest Price Namestar Personalized #2 Pencils, Snake/heart And Skull Designs, Pac...

Friday, March 2, 2012

Crown Bolt 33422 #6-32 x 1-1/2 Inch Stainless Steel Flat-Head Slotted Machine Screws, 25-Count

!#8# Crown Bolt 33422 #6-32 x 1-1/2 Inch Stainless Steel Flat-Head Slotted Machine Screws, 25-Count

Brand : Crown Bolt | Rate : | Price :
Post Date : Mar 02, 2012 16:15:32 | Usually ships in 24 hours

  • Stainless steel #6-32 x 1-1/2 inch flat head Phillips drive machine screw
  • For general applications
  • #6-32 body diameter and thread pitch
  • 1-1/2-inch fastener length
  • Stainless steel finish

Get Cheap Lacquer Box "czar's Will"...

Tuesday, February 28, 2012

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 10mm Length (Pack of 100)

!#8# Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 10mm Length (Pack of 100)

Brand : Small Parts | Rate : | Price :
Post Date : Feb 28, 2012 09:45:04 | Usually ships in 24 hours


  • Machine Screws are often used with nuts or driven into tapped holes
  • Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
  • Pan head allows for higher tightening torques
  • Phillips drive is designed to cam out under too much torque
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

More Specification..!!

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 10mm Length (Pack of 100)

Low Price Nike Air Max 2011... Sony Hdr-xr150 120gb Hd Handycam Camcorder .45x Wide Angle Lens 2x... Buy Online

Sunday, February 26, 2012

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 12mm Length (Pack of 100)

!#8# Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 12mm Length (Pack of 100)

Brand : Small Parts | Rate : | Price :
Post Date : Feb 26, 2012 20:19:03 | Usually ships in 24 hours

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

  • Machine Screws are often used with nuts or driven into tapped holes
  • Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
  • Pan head allows for higher tightening torques
  • Phillips drive is designed to cam out under too much torque
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Arizona State University 12-pack Cooler... Top Quality

Friday, February 24, 2012

StarTech Round Head Replacement 6-32 Hard Drive Mounting Screws - 15 Pack SCREW632R15

!#8# StarTech Round Head Replacement 6-32 Hard Drive Mounting Screws - 15 Pack SCREW632R15

Brand : StarTech | Rate : | Price : $1.99
Post Date : Feb 24, 2012 19:32:14 | Usually ships in 1-2 business days


  • Keep handy #6-32 threaded screws commonly used to fasten hard drives, power supplies and expansion cards to the computer chassis
  • Round Head Replacement 6-32 Hard Drive Mounting Screws - Pkg of 15
  • This pack of 15 #6-32 mounting screws are handy for replacing or adding hard drives to your computer systems.

More Specification..!!

StarTech Round Head Replacement 6-32 Hard Drive Mounting Screws - 15 Pack SCREW632R15

Steven By Steve Madden Women's Adeson Ankle Boot... Grand Sale Printed Flower And Leaf Design Tablecloth. 100% Cotton Woven. Green, 80... Order Now Farmer Brothers Breakfast Cocoa (unsweetened Cocoa), 5lb 4 Oz Restaurant ... Reviews

Thursday, February 23, 2012

Ceramic Machine Screw, Pan Head, Slotted Drive, #10-32, 3/4" Length (Pack of 1)

!#8# Ceramic Machine Screw, Pan Head, Slotted Drive, #10-32, 3/4" Length (Pack of 1)

Brand : Small Parts | Rate : | Price :
Post Date : Feb 23, 2012 03:48:24 | Usually ships in 24 hours


  • Machine Screws are often used with nuts or driven into tapped holes
  • Ceramic is suitable where primary considerations are high temperature and corrosion resistance
  • Pan head allows for higher tightening torques
  • Driven by a flat-bladed driver
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

More Specification..!!

Ceramic Machine Screw, Pan Head, Slotted Drive, #10-32, 3/4" Length (Pack of 1)

Online Matte Protective Decal Skin Skins Sticker (matte Finish) For Asus Eee Pad ...


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。