Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M4-0.7, 30mm Length (Pack of 100)
- Machine Screws are often used with nuts or driven into tapped holes
- Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
- Pan head allows for higher tightening torques
- Phillips drive is designed to cam out under too much torque
- Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.
Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.
Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.
- Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M3-0.5, 16mm Length (Pack of 100)
- Metric Black Oxide 12.9 Alloy Steel Socket Head Cap Screw, Hex Socket Drive, M3-0.50, 16 mm Length (Pack of 100)
- Samsung Slim 8X DVD+/-RW Internal Drive SN-S083C/BEBE (Black)
- Steel Hex Nut, DIN, M3-0.5 (Pack of 100)
- Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
